Milwaukee M12 FIR12, Руководство пользователя

Страница: 12 / 28

12
English 12
TECHNICAL DATA M12 FIR14 M12 FIR38 M12 FIR12
Tool reception 1/4 ″ (6.35 mm) 3/8 ″ (9.5 mm) 1/2 ″ (12 mm)
No-load speed 0–250 min -1 0–200 min -1 0–175 min -1
Torque max 54 Nm 75 Nm 81 Nm
Battery voltage 12 V 12 V 12 V
Weight according to EPTA-Procedure 01/2003 1.13 kg 1.36 kg 1.54 kg
Recommended ambient operating temperature -18°C – +50°C -18°C – +50°C -18°C – +50°C
Recommended battery types M12 batteries M12 batteries M12 batteries
Recommended charger M12 chargers
and M12-M18
charger M12 chargers
and M12-M18
charger M12 chargers
and M12-M18
charger
Noise/vibration information
Measured values determined according to EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K = 3 dB(A)) 80.6 dB(A) 82.6 dB(A) 75.3 dB(A)
Sound power level (Uncertainty K = 3 dB(A)) 91.6 dB(A) 93.6 dB(A) 86.3 dB(A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 62841.
Vibration emission value a
h
:
Impact tightening of fasteners of the maximum capacity of the tool 1.77 m/s 2 3.1 m/s 2 2.08 m/s 2
Uncertainty K = 1.5 m/s 2 1.5 m/s 2 1.5 m/s 2
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardized test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However, if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may signi
fi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may signi
fi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
WARNING! Read all safety warnings, instructions,
illustrations, and specifications provided with this power
tool.
Failure to follow all instructions listed below may result in
electric shock, fi re, and/or serious injury.
IMPACT RATCHET SAFETY WARNINGS
Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring.
Fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and could give the
operator an electric shock.
Wear ear protectors.
Exposure to noise can cause hearing
loss.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy
nonslip footwear, helmet, and ear defenders.
The dust produced when using this tool may be harmful to
health. Do not inhale the dust. Wear a suitable dust-protection
mask.
Do not use the machine near any materials that present a
danger to health (e.g., asbestos).
Switch the device off immediately if the insertion tool stalls! Do
not switch the device on again while the insertion tool is stalled,
as doing so could trigger a sudden recoil with a high reactive
force. Determine why the insertion tool stalled and rectify this,
paying heed to the safety instructions.