Milwaukee 48-59-0260, Руководство оператора

Страница: 4 / 16

Page 4
FUNCTIONAL DESCRIPTION
1. Light indicators
Light off indicates: Port is ready
Red light
Continuous: Charging
Flashing: Battery pack is too hot or too cold
(Charging will begin automatically when
battery reaches correct charging temperature)
Green light
Continuous: Charging is complete
Flashing: Battery pack is in the
"Top-Off" mode
2. Label
3. Electrical contacts
4. Battery pack bay
5. Vents
6. Cord wrap:
Stores excess cord
(on back of charger)
7. Cord (with pass-through plug)
1
2
6
7
Faster, Higher Power Charging
The Multi-Bay Charger is faster than standard single bay chargers, charging
a 2.4 Amp-Hour battery in approximately 45 minutes instead of the hour
needed by many single bay chargers. The independent bays can each
charge a different voltage battery (12, 14.4, or 18V).
Cord Wrap/Pass-Through Plug
A convenient cord wrap stores the 9-foot cord. A pass-through plug keeps
an outlet available for other uses.
Job Site Built
The rugged housing of the Multi-Bay Charger is well suited for the harsh
environment of job sites. Roll bars and blow-molded plastic protect the
charger during falls and bumps.
The high visibility bright indicator lights are mounted on top of the charger
for 360° viewing.
Dust covers on the electrical contacts help keep the dust and debris of job
sites out of the charger. When a battery pack is inserted, the dust covers
automatically retract to allow charging.
Battery packs can be stored on the bays and carried on the charger from
job to job. When the charger is plugged in, charging begins for the packs
on the bays.
TOOL USE AND FEATURES
3
4
5