Milnor Mark II, Операция

Страница: 9 / 92

6Pb?aTbbdaT7XVW[XVWc°6Pb\^ST[b
This light indicates that gas pressure delivered to the dryer is too high for proper
operation, or the dryer gas regulator is damaged.
5XaT4hTCaX__TS[XVWc°6Pb\^ST[b
On machines with Fireye flame control units, this light indicates that the flame rod
signaled the flame control unit that neither the pilot nor the burner is lit. On machines
with Landis & Gyr flame control units, this light indicates that one or more of the
requirements of the safety reset circuit is not satisfied.
5XaT4hT=^c0[[^fTS[XVWc°6Pb\^ST[b
On machines with Fireye flame control units, this light indicates that the microprocessor
requested fire but the flame control unit was not allowed to light because one of the
requirements of the safety reset circuit was not met. This light has no function on dryers
equipped with Landis & Gyr flame control units.
4
0dc^;X]c1PVXb5d[[[XVWc°0dc^;X]c
^_cX^]
This light illuminates when the AutoLint lint
collection bag is full. The device will not
operate until the bag is empty and
5
is
pressed.
5
0dc^;X]cATbTcQdcc^]°0dc^;X]c
^_cX^]
Press this button to enable AutoLint after
emptying the lint collection bag.
<P]dP[B_aX]Z[TaCTbcQdcc^]
Press this button to test the sprinkler used to extinguish a fire in the device.
4UcSbY`dY_^_V3_^db_\c±
=Qb[994biUb =C?E4E3D15)$##1F$$
(5/5)