Milnor 7272TG1L, Установка и обслуживание

Страница: 27 / 206

4biUb 9^cdQ\\QdY_^
@5<<5B9> =9<>?B 3?B@?B1D9?>
29@4&9 " @eR\YcXUT 2__[ c`USc 4QdUc* " # ""! " # ""! " # ""! <Q^W* 5>7 ! 1``\YS* @4&
3ahTa8]bcP[[PcX^]
After testing, the machine is disassembled and shipped in three parts: house and leg pallets and a
box containing miscellaneous brackets and panels.
7P]S[X]V?aTRPdcX^]b
1. Remove the protective coverings (leaving the machine on its shipping skids) and examine the
components carefully for possible shipping damage. If the machine is damaged, notify the
transportation company immediately.
=^cT ) Once the machine is given to the carrier for delivery, it is the sole responsibility of the
carrier to ensure that no damage occurs during transit. In addition to readily apparent damage, carriers
are liable for concealed damage. Do not hesitate to file a claim with the carrier if the machine has
been damaged in any way during shipment. Milnor® will be glad to assist you in filing your claim,
but is not responsible for shipping damage to the machine once it has been delivered to the carrier in
good condition.
=^cT !) The spreader bar mounting bolts (Figure 3) are inaccessible once the machines are mounted
side by side. Remove the spreader bar immediately after installing the legs, before setting or anchoring
dryer. Do not remove the lift plates as they are used to tie machines together.
2. Lifting plates are provided on the top of the house and are tagged as such. These lifting plates
must be used if lifting by crane.
3. Use the skids for fork lifting and, if possible, leave the machine on its shipping skids until it
is about to be assembled and placed in its final position. Once the skids are removed, take
care in placing forks under the machine. Do not allow the forks to come in contact with
valves, piping, etc., located on the machine.
4. Never push, pull, or exert pressure on any components that protrude from the machine frame.
5. Consult the Milnor factory if components such as the blower housing must be removed to fit
machine through openings.
Figure 1: Front Lifting Plate Figure 2: Rear Lifting Plate
21