Milnor 42044SR2 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 68

background image

Safety—Tilting Washer-Extractors

PELLERIN MILNOR CORPORATION

WARNING 12 : Multiple Hazards

—Operating the machine with an inoperative safety device

can kill or injure personnel, damage or destroy the machine, damage property, and/or void the

warranty.
• Do not tamper with or disable any safety device or operate the machine with a

malfunctioning safety device. Request authorized service.

WARNING 13 : Electrocution and Electrical Burn Hazards

—Electric box doors—

Operating the machine with any electric box door unlocked can expose high voltage conductors

inside the box.
• Do not unlock or open electric box doors.

WARNING 14 : Entangle and Crush Hazards

—Guards, covers, and panels—Operating

the machine with any guard, cover, or panel removed exposes moving components.
• Do not remove guards, covers, or panels.

WARNING 15 : Crush Hazards

—Down limit switches (machines with front and rear tilt

cylinders)—Failure of both front or both rear limit switches allows the seated tilt wheels on a

tilted machine to lift from their cradles. The housing will fall and lunge forward or rearward.
• Do not operate the machine with any evidence of damage or malfunction.

5.1.2.

Hazards Resulting from Damaged Mechanical Devices

WARNING 16 : Multiple Hazards

—Operating a damaged machine can kill or injure

personnel, further damage or destroy the machine, damage property, and/or void the warranty.
• Do not operate a damaged or malfunctioning machine. Request authorized service.

WARNING 17 : Explosion Hazards

—Cylinder—A damaged cylinder can rip apart during

extraction, puncturing the shell and discharging metal fragments at high speed.
• Do not operate the machine with any evidence of damage or malfunction.

WARNING 18 : Explosion Hazards

—Clutch and speed switch (multiple motor

machines)—A damaged clutch or speed switch can permit the low speed motor to engage during

extract. This will over-speed the motor and pulleys and can cause them to rip apart, discharging

metal fragments at high speed.
• Stop the machine immediately if any of these conditions occur: • abnormal whining sound

during extract • skidding sound as extract ends • clutches remain engaged or re-engage

during extract

5.2.

Careless Use Hazards

5.2.1.

Careless Operation Hazards—Vital Information for Operator Personnel (see also

operator hazards throughout manual)

WARNING 19 : Multiple Hazards

—Careless operator actions can kill or injure personnel,

damage or destroy the machine, damage property, and/or void the warranty.
• Do not tamper with or disable any safety device or operate the machine with a

malfunctioning safety device. Request authorized service.

• Do not operate a damaged or malfunctioning machine. Request authorized service.
• Do not attempt unauthorized servicing, repairs, or modification.

10

«
...
12
13
14
15
16
...
»

Содержание 42044SR2





































































Отзывы:

Нет отзывов

Похожие инструкции для 42044SR2

Бренд: JAC Страницы: 48

Бренд: JAC Страницы: 92

Бренд: Flama Страницы: 24

2.0 K400 SERIES

Бренд: Keurig Страницы: 11

BIESEMEYER 78-939

Бренд: Delta Страницы: 8

Бренд: Teka Страницы: 84

Бренд: NewAir Страницы: 14

Бренд: Marvel Страницы: 1

Бренд: OBH Nordica Страницы: 28

Open Kitchen Hot Air Popcorn Maker

Бренд: Williams-Sonoma Страницы: 16

Бренд: Waldorf Страницы: 24

Бренд: FoodSaver Страницы: 108

Бренд: Klarstein Страницы: 15

Бренд: Orbegozo Страницы: 13

Бренд: OYPLA Home Страницы: 2

Бренд: T-Fal Страницы: 32

Express Crock XL CPE300

Бренд: Crock-Pot Страницы: 32

Бренд: Crock-Pot Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды