Milnor 36026X8J, Установка и обслуживание, Страница: 41 / 126

Preventive Maintenance
PELLERIN MILNOR CORPORATION
that when you replace the belts, you purchase the exact style and type belts with which the
machine was originally equipped. This is the best way to achieve belt life on your replacement
belts equal to the life of the original set. If you are not satisfied with the life of the original set,
you should ask our factory if a better belt has been developed for the specific application.
Dry bleaches may cause the inside of the supply injector to show evidence of mild rusting. If this
occurs, carefully clean away rusting at least once a week. Always inject dry bleach from the cup
or scoop. Never allow dry bleach to come into direct contact with the stainless steel components
of the supply injector.
6.
Service Items
Figure 1: Bearing, Seal and Motor Grease Points
Bearing and seal grease
points
Motor grease points (If so equipped) Legend
.
1. Seal grease fitting
2. Bearing grease fitting
3. Bearing grease fitting
4. Motor grease fittings (if so
equipped)
Figure 2: Suspension Maintenance Points
Shock Ball bushing grease point Rubber springs
Legend
.
1. Shipping bracket (remove before operation)
2. Shock (two locations)
3. Ball bushing grease fittings
4. Rubber spring