Milnor 36026X8J, Установка и обслуживание, Страница: 36 / 126

Preventive Maintenance
PELLERIN MILNOR CORPORATION
BIMUUM01 (Published) Book specs- Dates: 20060509 / 20060509 / 20060509 Lang: ENG01 Applic: MXB
Preventive Maintenance
As required by the warranty and to achieve optimum performance and service life from Milnor
washer-extractors, the schedules, instructions and precautions herein must be strictly followed.
WARNING 1 : Entangle and Crush Hazards —Guards, covers, and panels—Operating the
machine with any guard, cover, or panel removed exposes moving components.
• Abide by the current OSHA lockout/tagout standard when lockout/tagout is called for in
the service instructions. Outside the USA, abide by the OSHA standard in the absence of
any other overriding standard.
• Do not service the machine unless qualified and authorized. You must clearly understand
the hazards and how to avoid them.
CAUTION 2 : Pinch Hazard-Suspended machines only —Spaces between the shell and
housing can close and crush or pinch your limbs. The shell moves within the housing during
operation.
• NEVER place fingers in gap between shell and frame.
1.
Lubrication Precautions
[Document BIUUUM01]
CAUTION 3 : Machine Damage Hazard —Improper lubrication can damage machine
components and cause the machine to malfunction.
• Do not mix petroleum and synthetic based lubricants.
• Do not use an unspecified lubricant without consulting the lubricant manufacturer.
• Do not apply grease with a pneumatic grease gun. Use only a hand-operated grease gun.
• Do not over-lubricate.
• Always clean grease fittings before adding grease. Clean off excess grease.
• Ensure that lubricants do not drip onto belts, brake shoes or drums.
WARNING 4 : Entangle and Crush Hazards —Contact with moving components normally
isolated by guards, covers, and panels, can entangle and crush your limbs. These components
move automatically.
• Abide by the current OSHA lockout/tagout standard when lockout/tagout is called for in
the service instructions. Outside the USA, abide by the OSHA standard in the absence of
any other overriding standard.
• Do not service the machine unless qualified and authorized. You must clearly understand
the hazards and how to avoid them.
1.1.
Pumping Grease
—Pump grease slowly, taking 10-12 seconds to complete each stroke. A
grease gun can build up extremely high pressure which will force seals out of position and cause
them to leak.