Millipore NovAseptic GMP ATEX Скачать руководство пользователя страница 38

Страница: 38 / 45

Component / Maintenance Check

Notes

Complete

Drive Unit

Check cables for damage

yes

Check the gearbox for leakage

yes

Check the gearbox for noise

yes

Check for any contact mark on Tank
Plate

yes

Check shaft and outer drive head rota-
tion and wobbling movement

yes

Check outer drive head for damage
caused by contact with Tank Plate

yes

Ensure bolt, screws, nuts and

ange

are in good condition and free of
damage

yes

Mixing Head

Inspect the silicone carbide on the
female bearing for damage.

yes

Inspect the inside of the mixing head
and bottom surface for damage. Check
that mixing head rotates easily. Listen
for noise.

yes

Inspect bottom surface of wings for
marks and scratches.

yes

Inspect the magnetic body for par-
ticles.

yes

Male Bearing

Remove and inspect ceramic bearing
for cracks and abnormal wear.

yes

Inspect the stainless steel foot.

yes

Make sure the O-ring is not damaged.

yes

Check for loose ceramic parts.

yes

Check for thread deformation.

yes

Install and ensure male bearing is
tightened to proper torque (metal-to-
metal).

yes

Tank Plate

Inspect tank plate for scratches, marks,
and/or damage.

yes

Inspected by:

Print name ________________________________________________________

Signature __________________________________________________________

Date inspection completed

NovAseptic GMP ATEX Mixer Installation and User Guide

Содержание NovAseptic GMP ATEX














































Результаты поиска

Содержание NovAseptic GMP ATEX

Отзывы:

Бренды по названию

Популярные бренды

Millipore NovAseptic GMP ATEX, Инструкция по установке и эксплуатации

Результаты поиска

Содержание NovAseptic GMP ATEX

Отзывы:

Бренды по названию

Популярные бренды