Millipore NovAseptic GMP ATEX, Инструкция по установке и эксплуатации

Страница: 19 / 45

Mixing Head Installation
See NovAseptic GMP Mixing Head Installation Guide 00101787PU for additional
information.
Handle the mixing head with care. •
Use extreme care when mounting the mixing head on to the male bearing; •
mixer bearings are brittle.
Do not mount the drive unit before installing the mixing head. The powerful •
magnetic force between the mixing head and the outer drive head may cause
severe damage to bearings as well as personal injury.
Follow all local safety codes before entering the vessel. •
Remove any foreign magnetic particles from the mixing head. 1.
If the mixing head must be placed on a table, place the female bearing
downward to prevent magnetic particles from adhering to the magnetic surface
of the mixing head.
Remove the drive unit. 2.
Install the mixing head using the multi-tool. Mixing head sizes GMP 3.
5 000–20 000ATEX must be installed by hand.
Carefully position the mixing head by turning it while lowering it onto the male 4.
bearing.
Align the mixing head with the tank plate. Ensure that the mixing head rotates
smoothly.
!
18 www.millipore.com