00110230w Rev 10/20
3 of 24
Symbols and Safety Precautions
This system is intended for research use. Go to
IT IS IMPORTANT TO READ THESE INSTRUCTIONS BEFORE USING THIS INSTRUMENT .
Y
• Please read these safety instructions and user manual carefully before using the cell counter and/or any accessory
supplied with this product.
• Keep these instructions for future reference.
• If there is any contradiction between the information in the manual and the information in this notice, the information in
this notice takes precedence.
• The protection provided by this equipment may be compromised if it is used incorrectly.
• Obey the instructions that are given to you. Do not perform any work on the inside of the instrument.
Y
This symbol indicates that there is a component inside the cell counter that might represent a particular hazard
(refer to the operating manual) (HAZARD).
For Global Registration Marks of Conformity, p.24.
C
Affixed in accordance with the most recent European Council Directives which apply to this instrument.
Please refer to the Declaration of Conformity for further detail.
Federal Communications Commission (FCC) conformity marking TFB-1003.
This symbol represents the products compliance to Chinese RoHS. For more information on RoHS compliance
please see the products Declaration Of Conformity.
This product has been evaluated by an OSHA certified Nationally Recognized Testing laboratory (NRTL).
Y
WARNINGS
• To avoid danger of electric shock, do not install the instrument in an area with a high humidity level, such as a greenhouse or an incubator.
Refer to
Operating Environmental Conditions, p .22
.
• Do not touch the charger station and plug with wet hands.
• To avoid potential shock hazard, choose the correct plug configuration and make sure that the USB cable/power adapter
is plugged securely into a properly grounded AC power outlet.
• Always ensure that the power supply input voltage matches the voltage available in your location.
• Do not use with flammable or explosive liquids.
• Do not immerse instrument body in liquid, or allow liquid to enter any part of the instrument.
• Do not expose instrument to vibrations. Vibrations may cause instrument malfunction or damage.
• Do not autoclave or expose to high temperature.
• To avoid damage to internal electronic components, do not spray instrument with sanitizing agents. Refer to
• Use only authorized accessories (Charging Station).
• If the instrument is broken or dropped, Do not try to disassemble the instrument. Go to
for assistance.
BATTERIES
Battery is not user accessible or user replaceable. For more information, go to
Do not use instrument in a humid
and/or corrosive environment.
• Do not disassemble, pierce or modify the batteries or subject them to unnecessary shocks that would risk damaging them.
• Do not leave near or in direct contact with a heat source (risk of leakage and/or explosion which may cause injuries and/or damage).
• In the event of leakage and direct contact with the fluid, rinse the exposed area with plenty of water and seek medical
advice immediately.
• Do not put the batteries in your mouth. If swallowed, seek medical advice or contact the nearest poison control center immediately.
THE LITHIUM-ION BATTERY OF YOUR INSTRUMENT CONTAINS SUBSTANCES THAT MUST BE RECYCLED. DO NOT DISCARD WITH
COMMON SOLID WASTE AT END OF LIFE. PLEASE DISPOSE OF IT IN A RECYCLING BIN SUITABLE FOR THIS TYPE OF PRODUCT.
SEGREGATE WITH OTHER WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) IN THE EUROPEAN UNION, PLEASE VISIT
SYSTEM DISMANTLING – WEEE directive
In accordance with European Union directive on the management of waste electrical and electronic equipment (WEEE),
this product must not be disposed of in unsorted municipal waste at the end of its life. It must be taken to a collection
and recycling center. For further information, go to
ANTENNA
Unauthorized modification of the built-in antenna or use of unauthorized accessories might damage the system and render it
non-compliant with directives such as the EU RED directive and FCC regulations. This instrument complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This instrument may not cause harmful interference, and
(2) this instrument must accept any interference received, including interference that may cause undesired operation.
