Miller XMT350 CC/CV Auto-Line CE, Руководство пользователя

Страница: 39 / 56

A complete Parts List is available at www.MillerWelds.com
OM-2254 Page 33
8-4. Pulsed MIG Welding Mode - GMAW-P Process
!
Weld terminals are energized
through the remote control in
Pulsed MIG welding mode.
1 Mode Switch
2 Left Display
3 Right Display
4 Adjust Control
Setup
For typical system connections refer to
Section 8-3.
Rotate Mode Switch to PULSED MIG posi-
tion as shown.
Left and Right Display will show PPP PPP.
Operation
This unit requires an external pulsing
device, like an Optima to pulse MIG weld.
See Optima owner’s manual for more in-
formation.
242 020-A
4
1
2 3
PP.P PPP