Miller TM-4414K, Техническое руководство

Страница: 24 / 36

TM-4414 Page 20 Belt/Hydraulic-Drive Generator
SECTION 7 − DISASSEMBLY AND REASSEMBLY
7-1. Disassembling/Reassembling Generator
803 235
Use Section 6-2 to determine if trouble is
in stator, rotor, control box, or combina-
tion of these components.
1
Rotor
2 Stator Assembly
! Use hoist and lifting strap to care-
fully disassemble/reassemble
generator .
! Do not damage rotor or stator
windings during this procedure.
.
Mark electrical leads and remove
brush holder assembly before dis-
assembling unit.
Reassemble generator parts using
torque values in table.
Reconnect all leads. Use cable ties to
secure leads away from moving or hot
parts.
A 95 in lb (10.7 N
.
m)
B 38 ft lb (52 N
.
m)
(Belt Tensioner)
Torques:
Tools Needed:
1
Remove brush holder
before disassembling
rotor and stator.
2
A
B
Apply SAE 30W oil to
both ends of studs
before installing.
Apply Loctite 242 or
equivalent to screw
before installing.