Miller S-74 MPa Plus, Техническое руководство

Страница: 47 / 56

TM-273245 Page 43 S-74 MPa Plus
9-10. 14 Pin Filter Board PC5 Test Point Values
a) Tolerance −
±
10% unless specified
b) Triggered − means when gun trigger is
pressed
c) Reference RC5 − 2 for AC Circuit Common −
unless noted otherwise
Reference RC3 − 3 for DC Circuit Common −
unless noted otherwise
d) Note − 15 VDC measurements will be closer
to 14 V
e) Process Select voltage measurement use
PC1 RC4 − 5 to RC4 − 11
PC5 Voltage Readings
Receptacle Pin Value
RC1 1 Chassis ground
RC28 1 Reed −
2 Reed +
3 Flow −
4 Flow +
RC30 1 14 Pin E Command 0 − 10 volts DC reference to RC30 − 5
2 14 pin L wire feed speed command 0 − 10 volts DC reference to RC30 − 4
3 14 Pin M wire feed speed mode (Process Select) 3.5 volts DC in MIG, 2.5 volts DC in pulse reference to
RC30 − 4
4 14 Pin N wire feed speed common
5 14 pin D Power Source Common
6 14 pin H Voltage Feedback 1V/10V reference to RC30 − 5
7 14 pin F Current Feedback 1V/100A reference to RC30 − 5
8 14 pin B Contactor 24 volts AC reference RC32 − 2
9 Not used
10 14 Pin C 10 volts DC reference to 14 pin D
RC31 1 14 Pin A 24 volts AC reference to RC31 − 2
2 14 Pin G 24 volts AC Circuit Common
3 Not used
RC32 1 24 volts AC In 14 Pin A reference to RC32 − 2
2 24 volts AC Circuit Common 14 Pin G
RC33 1 Voltage Feedback 1V/10V
2 Current Feedback 1V/100A
3 Command
4 Wire feed speed command 0 − 10 volts DC reference to RC30 − 5
5 Process Select Mig 3.5 volts Pulse 2.5 volts
6 Contactor 24 VAC reference RC31 − 2
7 Not used
8 Reed & Flow common
9 Reed
10 Flow
11 Common
12 Wire feed speed common