Miller Millermatic 255, Руководство пользователя

Страница: 43 / 68

A complete Parts List is available at www.MillerWelds.com
OM-279299 Page 39
6-9. Pulsed MIG Auto-Set t Mode
Pulsed MIG is a spray transfer that pro-
duces less heat input than conventional
spray transfer, resulting in less warping,
distortion, and spatter. Pulsed MIG is often
used for MIG welding aluminum.
1 Auto-Set Button
2 Pulse Button
Press Auto-Set and Pulse buttons.
3 Wire And Gas Buttons
Use soft keys to select wire and gas for
Pulsed MIG.
4 Wire Diameter
Use soft key to select wire diameter.
5 Material Thickness
Use soft keys to move cursor to left or right
to select material thickness.
6 Left Knob
Use left knob to fine tune arc length. Arc
length defaults to 50.
7 Right Knob
Use right knob to fine tune wire feed speed.
Arc Length
Arc length can be adjusted from 0-99. All
Pulse MIG programs are set with a value of
50. Adjusting the Arc Length will vary the
length of the welding arc cone.
(0 Setting) (99 Setting)
Low Setting High Setting
If a gas is used other than what is listed on
the Pulse MIG welding program chart, the
Arc Length can be adjusted to help custom-
ize your arc to the gas being used.
1
3
4
2
5
6
7
297061-D