Miller Maxstar 200 DX, Руководство пользователя

Страница: 30 / 94

OM-2226 Page 24
4-14. TIGRunner Connections
Cart and cooler are optional equip-
ment.
1
Gas Cylinder
2 Chains
Secure gas cylinder to cart with
chains.
Connect gas hose to welding power
source (see Section 4-11).
Connect work lead and torch to
welding power source (see Section
4-12).
3
Water-Out (To Torch)
Connection
Connect torch water-in (blue) hose
to welding power source water-out
connection.
4
Water-In (From Torch)
Connection
Connect torch water-out (red) hose
to welding power source water-in
connection.
5
115 Or 230 Volt AC Grounded
Receptacle (Depending On
Model)
For 115 volt models, an individual
branch circuit capable of carrying
15 amperes and protected by fuses
or circuit breakers is recom-
mended. Recommended fuse or
circuit breaker size is 15 amperes.
For 230 volt models, an individual
branch circuit capable of carrying
10 amperes and protected by fuses
or circuit breakers is recom-
mended. Recommended fuse or
circuit breaker size is 10 amperes.
6
Power Cord
NOTICE − Do not cut plug from 115
volt cord and attempt to rewire for
230 volts, or do not cut plug from
230 volt cord and attempt to rewire
for 115 volts.
1
Low Conductivity Coolant
No. 043 810**;
Distilled Or Deionized Water
OK Above 32
° F (0 ° C)
GTAW Or Where
HF* Is Used
Application
*HF: High Frequency Current
**Coolant 043 810, a 50/50 solution, protect to -37
°
F (-38
°
C) and resist algae growth.
Coolant
805 338-A
Tools Needed:
11/16 in., (21 mm for CE units)
NOTICE − Use of any coolant other than those listed in the table voids the warranty
on any parts that come in contact with the coolant (pump, radiator, etc.).
2
3
4
5
6