Miller FILTAIR 301053, Руководство пользователя

Страница: 22 / 36

OM-258 830 Page 18
F. Attaching Top Cover Support Brackets
See Section 4-3B for installation hard-
ware torque values.
1 Cross Support Bracket
2 Side Support Bracket
3 Center Support Bracket
4 Button-Head Screw
Use 1/4 x 3/4 in. screws and nuts to attach
side support brackets and center support
bracket to each cross support bracket as
shown.
Use button-head 1/4 x 3/4 in. screws and
nuts to attach cross and side support
brackets to perimeter ends. Use regular
head 1/4 x 3/4 in. screws and nuts to attach
cross and side support brackets to extrac-
tor sides.
5
Foam Tape
Measure and cut proper length of foam
tape to fit across the top of the cross, cen-
ter, and side support brackets. Peel off
backing from tape and apply tape to sup-
port brackets.
3
1
4
301054-5 / Ref. 300963-2A
5
2
Install cross and side support
mounting brackets beneath
perimeter bracket, and also
beneath extractor.
4
The 14 x 14 ft model is shown.