Miller FILTAIR 301053, Руководство пользователя

Страница: 19 / 36

OM-258 830 Page 15
B. Torque Values
Torque assembly hardware as follows:
Hardware
Torque Value
1/4 in. screw 6.3 ft lb (8.5 N
.
m)
5/16 in. screw 13 ft lb (17.6 N
.
m)
3/8 in. screw 23 ft lb (31 N
.
m)
C. Attaching Components To Perimeter Brackets
See Section4-3B for installation hard-
ware torque values.
1 Perimeter Bracket Mounting Plate
2 End Perimeter Bracket A (With Miller
Label)
3 End Perimeter Bracket B (Without
Miller Label)
4 Side Perimeter Bracket A (With Miller
Label)
5 Side Perimeter Bracket B (Without
Miller Label)
Use 1/4 x 3/4 in. screws and nuts to attach
eight perimeter bracket mounting plates to
side and end perimeter brackets.
6
Lifting Bracket
7 Corner
8 Left Post Support Bracket
9 Right Post Support Bracket
Use 5/16 x 1 in. screws and nuts to attach
four lifting brackets to corners.
Use 1/4 x 3/4 in. screws and nuts to attach
two corners, one left post support bracket,
and one right post support bracket to right
side perimeter bracket.
Assemble right side perimeter brackets
and end perimeter brackets together.
Use 1/4 x 3/4 in. Screws and nuts to attach
two corner, one left post support bracket,
and one right post support bracket to left
side perimeter brackets.
Assemble left side perimeter brackets but
do not attach them to right side and end
perimeter brackets.
10 Clip (For 17/64 in. Holes)
Insert clips into unused 17/64 in. holes in
perimeter brackets.
11 Clip (For 11/32 in. Holes)
Insert clips into unused 11/32 in. holes in
perimeter brackets.
301054-2 / 301054-10
Insert clips into unused
holes in perimeter brackets.
10
11
3
1
8
9
4
2
7
6
3
5
3
4
5
5
1
5
2
3
The 14 x 14 ft model is shown.
See Section 3-1B to
determine orientation
of long and short panel
lengths. Lengths are
specific to each hood
size.