Miller ArcReach, Руководство пользователя

Страница: 17 / 67

OM-281136 Page 11
B. ArcReach Heater Extension Cable With ArcReach Heater Series Adapter
FCC Compliance
This equipment has been found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Changes or modifications that are not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
FCC Class A - 2019-10
ISED RSS-Gen Issue 5 Requirement
The ArcReach Heater Extension Cable contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Exigence ISDE CNR − Gen 5e édition
Le câble d’extension pour réchauffeur ArcReach contient un/des émetteur(s) − récepteur(s) exempt(s) de licence(s)que se conforme(nt) avec
Innovation, Sciences et Développement économique Canada. CNR exempte(s) de licence(s). Son fonctionnement est soumis aux deux
conditions suivantes:
1. Ce dispositif ne doit causer aucune interférence nuisible.
2. Ce dispositif doit accepter toutes les interférences, y compris celles qui pourraient provoquer un fonctionnement non désiré du dispositif.
B
A
C
Ref. 282443-A
Dimensions
A
3.9 in. (98 mm)
7.5 in. (190 mm) w/Series Adapter
B 6.125 in. (155 mm)
C 10 ft in. (3.0 m)
Weight
20 lb (9.1 kg)
C. Air-Cooled Heating Cables
Part No. Dimensions Weight
301453030 Length: 30 ft (9.1 m) 15 lb (7 kg)
301453050 Length: 50 ft (15.2 m) 25 lb (11 kg)
301453080 Length: 80 ft (24.4 m) 40 lb (18 kg)
D. Air-Cooled Preheat Cable Covers
Part No. Dimensions Weight
204611 Length: 30 ft (9.1 m) 5 lbs (2.2 kg)
204614 Length: 50 ft (15.2 m) 9 lbs (4 kg)
204620 Length: 80 ft (24.4 m) 15 lbs (6.5 kg)
.
The preheat cover is for mechanical protection only (abrasion / weld spatter). It is not for thermal protection.