Miller 907439002, Руководство пользователя

Страница: 35 / 90

General
OM-249474 Page 29
8-3. Connecting To Weld Terminals
Tools Needed:
245 733-C / 803 778-A
3/4 in. (19 mm)
4
2
3
Do not place
anything between
1
weld cable terminal
and copper bar.
!
Turn off power before connecting to
weld output terminals.
!
Failure to properly connect weld
cables may cause excessive heat
and start a fire, or damage your
machine.
Determine total cable length in weld circuit
(both positive and negative cables
combined) and maximum welding
amperes. See Section 8-2 to select proper
cable size.
1 Weld Output Terminal
2 Supplied Weld Output Terminal Nut
3 Weld Cable Terminal
4 Copper Bar
Remove supplied nut from weld output
terminal. Slide weld cable terminal onto
weld output terminal and secure with nut so
that weld cable terminal is tight against
copper bar. Do not place anything
between weld cable terminal and copper
bar. Make sure that the surfaces of the
weld cable terminal and copper bar are
clean.
Correct Installation
Incorrect Installation