Miller Electric Syncrowave 500, Руководство пользователя

Страница: 14 / 56

OM-350 Page 10
2-4. Typical Process Connections
WARNING
HIGH-FREQUENCY RADIATION can interfere with radio navigation, safety services,
computers, and communications equipment.
•
Have only qualified person familiar with electronic equipment perform this installation.
•
Read and follow entire Section 6 for proper location and installation requirements for high-frequency equipment before installing
unit.
swarn13.1 4/93
Welding
SMAW Power
Work
Welding
GTAW
Work
Source
With HF
Off
Power
Source
With HF
On
2-5. Selecting A Location And Moving Welding Power Source
ssb9.1 5/94 – ST-800 402 / ST-127 872-A
1 Lifting Eye
2 Lifting Forks
Use lifting eye or lifting forks to
move unit.
If using lifting forks, extend forks
beyond opposite side of unit.
3 Rating Label
Use rating label to determine input
power needs.
4 Line Disconnect Device
Locate unit near correct input pow-
er supply.
OR
1
3
Movement
Location And Airflow
2
18 in
4
(460 mm)
18 in
(460 mm)
Y
Special installation may be required
where gasoline or volatile liquids are
present – see NEC Article 511 or CEC
Section 20.