OM-216 655 Page 9
1
Inlet Wire Guide
2
Intermediate Wire Guide
Install and secure inlet wire guide,
and intermediate wire guide.
3
Drive Roll (4)
Install drive rolls and turn drive roll
nut one click.
During maintenance intervals,
remove drive rolls, and clean
grooves using a wire brush. Check
general condition of drive rolls.
Aligning Wire Guide And Drive
Rolls:
View is from top of drive rolls
looking down with pressure assem-
bly open.
Turn screw in or out until drive roll
groove lines up with wire guide.
Close pressure roll assembly.
Repeat for remaining drive rolls un-
til all drive rolls line up with wire
guides as shown.
3-8. Installing Wire Guide And Drive Roll
956142675_B
Tools Needed:
3/8 in.
1
2
3
Incorrect Alignment
Correct Alignment
1
−
2
3
1/4 in.
