Miller Electric Big 40G, Руководство пользователя

Страница: 30 / 60

OM-477 Page 26
7-3. Servicing Air Cleaner
aircleaner1 6/96 – ST-153 929-B / ST-153 585 / Ref. ST-191 898 / Ref. S-0698-B
Stop engine.
Do not run engine without air
cleaner or with dirty element.
Clean or replace element if dirty or
damaged. Replace element yearly
or after six cleanings.
1 Dust Cap
2 Baffle
3 Element
4 Plastic Fins
5 Housing
To Clean air filter:
Wipe off cap and housing. Remove
cap and dump out dust. Wipe dust
from inside cap and housing with
damp cloth. Remove element and
reinstall cap.
Do not clean housing with air
hose.
Clean element with compressed air
only. Keep nozzle at least 1 in (25
mm) from inside of element. Max. air
pressure: 100 psi (690 kPa). Do not
remove plastic fins. Replace ele-
ment if it has holes or damaged
gaskets.
Reinstall element and cap (cap
arrows pointing up).
Blow Inspect
1 2 3 5 4
7-4. Overload Protection
Ref. ST-159 730-A / Ref. ST-191 898
Stop engine.
If any fuse or circuit breaker
continues to open, contact Fac-
tory Authorized Service Agent.
1 Magnetic Shutdown
Switch MS1
2 Fuse F (See Parts List)
Fuse F protects magnetic shutdown
switch MS1. If fuse F opens, the
engine stops.
Check fuse and replace if open.
3 Circuit Breaker CB3 (Optional)
4 Circuit Breaker CB4 (Optional)
CB3 protects the 115 volt ac output
and CB4 protects the 24 volt ac out-
put to optional Remote 14 recep-
tacle RC3 and terminal strip 3T. If a
circuit breaker opens, 24 or 115
volts ac output stops.
Press button to reset breaker.
Tools Needed:
1
2
3 4