www.GateOpenerSafety.com
Power:
12-24 VAC/DC nominal (8-30V max); typically 130 mA device power may be supplied from the
operator or alternatively from an external supply
Note: when using a normally closed operator input, MIM-62 must connect to operator accessory power
Cable Connections:
18-22 AWG
Dimensions:
4”W x 4.74”H x 1”D
Indicator Lights:
5-
Specifications and Controls
LED
State
Meaning
Green Power LED
On
MIM-62 is getting power
Off
No power to MIM-62
Yellow Output LED (A or B)
On
One of the input devices has detected a fault
Off
No Faults detected for this output channel (A or B)
Red Input LED (1-6)
Off
This input is working properly
On: Solid
This input has detected a Fault
On: Slow blink
This device has detected a termination fault
On: Fast blink
This device failed the N.C. monitoring test on power up
MODEL: MIM-62
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which may be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1- Re-orient or relocate the receiver antenna
2- Increase the separation between the equipment and the receiver
3- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4- Consult the dealer or an experienced radio/TV technician for help.
Changes or Modifications Not Expressly Approved By The Party Responsible For Compliance Could Void
The User’s Authority To Operate The Equipment.
6-
FCC Compliance
