Millennium OL'MAN OL-11-00, Инструкция по эксплуатации

Страница: 19 / 28

5082019
19
Figure 26
Attach Seat Assembly to the Stand Frame
STEP 11: Attach the seat assembly to the stand frame using four (4) ¼” x 1-3/4” bolts, four (4) washers and four (4) nuts. Place wash-
ers under the nuts only. DO NOT place washers under the head of the bolts as shown in Figure 26.
Do not tighten bolts at this time.
STEP 12: You can now go back and tighten all the hardware you have installed so far starting first with the tree blade bolts, second the
upright to platform bolts, third the armrest to platform bolts, fourth the armrest to upright bolts, fifth the shooting rail to arm rest bolts, sixth
the foot rest bolts and seventh the seat hinge to upright bolts. Now check your seat to see that it raises and lowers correctly.
WARNING! DO NOT place more than fifteen (15) pounds (7 kg) of weight on the footrest, shooting rail or seat back. DO NOT attempt to use
any of these as a handhold or to pull yourself up into or lower yourself while exiting the treestand. Doing so will result in an unsafe condi -
tion. Failure to follow these instructions may result in serious injury or death!