background image

5082019

10

 FULL-BODY FALL ARREST HARNESS SYSTEM INSTRUCTIONS (TREE BELT)

STEP 1: Once you have reached your desired height, insert 

the tree belt (refer to Figure 1 for identification) through the 

loop of the full-body fall arrest harness tether loop as shown 

in Figure 9. Wrap the tree belt around the tree at a height that 

allows  just  enough  slack  for  you  to  sit  comfortably  in  your 

stand (as shown in Figure 10). NOTE: Keeping the full-body 

fall arrest harness tether as short as possible limits the dis-

tance you will travel in the unlikely event you should experi-

ence a fall.

STEP 2: Secure the tree belt by inserting the tag (free-end) 

end  through  the  slot  in  the  buckle  closest  to  opposite  end 

of the tree belt, then cross over the sliding mechanism and 

back down through opposite slot. Pull on tree belt to secure 

and test to make sure sliding mechanism engages, creating 

secure tree belt placement. Refer to Figure 11 for proper tree 

belt buckle threading. YOU MUST thread  the tree belt buckle 

as shown in Figure 11. Failure to do so may result is failure 

of the tree belt.

WARNING! YOU MUST thread the tree belt buckle as shown in Figure 11. Failure to thread the buckle as shown will result 

in the belt failing to hold and separation from the tree trunk. Failure to follow these instructions may result in serious injury or 

death!

6

Figure 11

Threading Tree Belt Buckle

Figure 13

Full-Body Fall Arrest Harness

 Tether While Seated

Figure 12

Full-Body Fall Arrest Harness

 Tether While Standing

Figure 10

Wrap Tree Belt Around

Tree Trunk

STEP  3:  With  the  full-body  fall  arrest  harness 
tree belt and tether installed as outlined previ-
ously, adjust the height of the tree belt so it is 
taunt  as  shown  in  Figures  12  and  13.  Please 
note,  the  tether  length  will  vary  depending  on 
whether or not you are plan on standing or sit-
ting during your use of this Millennium Outdoor 
product.  You  must  keep  the  tether  length  as 
short  as  possible  at  all  times  to  minimize  the 
distance you might fall in the unlikely event you 
experience  a  fall  while  using  this  Millennium 
product.

1

3

2

4

5

6

Figure 9

Insert Tree Belt Through 

Full-Body Fall Arrest Harness Tether 

Loop

Содержание OL'MAN OL-11-00





























Отзывы: