Millennium OL'MAN OL-11-00, Инструкция по эксплуатации

Страница: 17 / 28

5082019
17
Figure 22
Install Shooting Rail Onto Arm Rest
STEP 7: Mount the shooting rail to the arm rest using two (2) 5/16” x 4” bolts, two (2) spacers, four (4) washers and two (2) nuts. Place
one (1) spacer between shooting rail and arm rest and one (1) washer under the heads of bolts and one (1) washer under the nuts as
shown in Figure 22.
Figure 23
Install the Seat Spreader Bars
STEP 8: Install the three (3) seat spreader bars to the bottom of the seat by placing six (6) 1/4” x 2-1/4” bolts thru the seat tensioning
support bar and then thru the seat frame placing one (1) washer under the head of bolt and one (1) washer under the nut on both sides
of the seat. Finger tighten only at this time as shown in Figure 23. NOTE: The front seat spreader bar is longer than the other two (2)
spreaders.
WARNING! DO NOT place more than fifteen (15) pounds (7 kg) of weight on the footrest, shooting rail or seat back. DO NOT attempt to use
any of these as a handhold or to pull yourself up into or lower yourself while exiting the treestand. Doing so will result in an unsafe condi -
tion. Failure to follow these instructions may result in serious injury or death!