5082019
15
Figure 18
Install Shooting Rail Adjusters on Arm Rest
STEP 3: Install the two (2) shooting rail adjusters on the arm rest as shown in Figure 18. Secure to the arm rest by tightening the shoot-
ing rail adjuster knob.
Figure 19
Attaching Arm Rests
STEP 4: Attach the arm rests to the platform using two (2) 5/16” x 4” bolts, two (2) bushings, four (4) washers and two (2) nuts. NOTE:
The bushings go between the arm rest and the platform and one (1) washer goes under the head and nut on each bolt. Attach the arm-
rests to the uprights using four (4) 5/16” x 2-3/4” bolts, twelve (12) washers and four (4) nuts. Place one (1) washer between the armrest
and upright and one (1) washer under the head of bolt and nut as shown in Figure 19.
WARNING! DO NOT place more than fifteen (15) pounds (7 kg) of weight on the footrest, shooting rail or seat back. DO NOT attempt to use
any of these as a handhold or to pull yourself up into or lower yourself while exiting the treestand. Doing so will result in an unsafe condi
-
tion. Failure to follow these instructions may result in serious injury or death!
Содержание OL'MAN OL-11-00
Страница 13: ...w Y w...
Страница 27: ...5082019 27...