Page 6 of 16
Millennia Media, Inc.
4600 Missouri Flat Road, Suite 11
Placerville, CA 95667
http://www.mil-media.com
(530) 647-0750
Fax (530) 647-9921
The LOCi compensation and filter circuits are
based upon a unique shunt topology. This
topology is unlike conventional "state variable"
filters in that only one signal path amplifier is
employed. Compare this with conventional filter
designs employing upwards of four to seven
signal path amplifiers. Fewer amplifiers means
greatly improved sonic integrity.
LF filter points are preset to 20, 35, 60, 100,
180, and 260 Hertz. High frequency filter points
are preset to 1, 2, 3, 5, 8, and 12 kHz.
(8) PEAK/SHELF SELECT SWITCH
Pushbutton switch which selects LF and HF filter
curve shape. When switch is depressed and LED
is illuminated, EQ is shelving at 6 dB per octave.
When switch is not depressed, EQ is peaking
with a fixed "Q" of 1.0 about the center
frequency selected.
(9) BOOST/CUT CONTROL
Four conductive plastic rotary potentiometers
offering up to +10 dB of boost and -10 dB of
cut. Boost/Cut potentiometer has 21 detented
positions for accurate repeatability and session
logging.
(10) PRE EQ OUTPUT TRIM
Variable output from the input to the filter and
compensation circuits. A setting of '0' is unity
gain. This is post preamp/switching circuits, pre
compensation/filter circuits.
(11) POST EQ OUTPUT TRIM
Variable balanced output post
compensation/filter circuits. A setting of '0' is
unity gain.
(12) POWER SWITCH "POWER"
Rocker switch for switching AC line power on
and off.
