Millcreek 57G, Руководство оператора

Страница: 19 / 38

Operator's Manual: Millcreek 57G & 77G Ground Drive Spreaders
4-3
I-86198-A
Short Link
Crank Arm Sprocket
Holding Pawl
Drive Pawl
Gap
Bracket
Tighten
Loosen
Procedures for Spreader Adjustment
Problems with spreader operation may indicate that certain adjustments are required to restore proper
functioning. The following procedures address common problems which may be encountered in spreader
operation.
Adjusting the Holding Pawl
If the apron chain is not advancing properly, the holding pawl may need to be re-adjusted to restore proper
apron chain speed and functioning.
To Reset the Holding Pawl (refer to Figure 4B):
(a) Rotate the crankarm sprocket until the short link is in the horizontal rearward position.
(b) Loosen the nut that secures the holding pawl.
(c) Adjust the holding pawl to obtain a 1/8" gap between the end of the pawl and bottom of the
notch as shown in Figure 4B. Tighten the nut to secure the holding pawl.
Figure 4B - Adjusting the Holding Pawl and Ratchet Drive Chain