Millcreek 57G, Руководство оператора

Страница: 18 / 38

Operator's Manual: Millcreek 57G & 77G Ground Drive Spreaders
4-2
Guidelines for Regular Maintenance (continued)
Figure 4A - Adjusting the Floor Apron Chain for Proper Tension
• Periodically check the floor apron chain for proper tension/tightness (refer to Figure 4A).
Procedure for checking/adjusting the floor apron chain:
a) Check the distance between the apron chain and the bottom of the side sheet at the apron's
lowest point (just behind the wheels). If the distance is more than 6-1/2 inches, the
chain must be tightened.
NOTE: The recommended floor apron chain tension is achieved when the apron's
lowest point is 4-1/2 to 5 inches below the frame (behind the tire).
b) Use a 9/16" wrench to tighten the adjustment nut on the lower left/right front of the spreader
box as shown in Figure 4A. Observe the chain positioning with respect to the floor/apron.
Make sure that the chains on each side of the apron are equally taut.
Nut