MilDef Crete DR786, Руководство пользователя

Страница: 41 / 43

Maintenance/Service
3 3
MAINTENANCE / SERVICE
Cleaning
ALWAYS turn OFF the power, unplug the power cord before cleaning.
The exterior of the system and display may be wiped with a clean, soft, and lint-
free cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol
based glass cleaner to the cloth and wipe.
An air gun is recommended for cleaning water and dust. For salty water
please clean with fresh water then blow-dry with an air gun.
Troubleshooting
Should the computer fail to function properly, the troubleshooting steps below
may be followed.
•
Check AC/vehicle adapter, battery, and the power source.
•
Minimize the configuration, i.e., remove extra peripherals and devices.
•
Remove the modules one by one (HDD, CD-ROM, FDD, Battery, etc.).
•
Remove the software suspected.
•
Set BIOS fail-safe default.
•
Re-install operating system and application software.
RMA Service
If troubleshooting steps are unsuccessful, consult your dealer for service. If it is
necessary to send in your computer for repairs, a representative from your
authorized technical support department will provide you with an RMA#. Only
after you have spoken with a technical support representative and received an
RMA# should you send in your computer.
Shipping instructions:
1. Remove any personal add-on devices, or other media.
2. Use the original shipping container and packing materials, if possible.
3. If the original packing materials are not available, wrap the equipment with
soft material (e.g., PU/ PE form) then put the wrapped equipment into a hard
cardboard shipping box.