Appendix A - Troubleshooting
87
Problem 3:
On the LAN, there is an IP Address conflict involving the Dial-in PC.
How do I set the IP Address allocated to the Dial-in PC?
Answer 3:
This problem can only occur if the Wireless Gateway's DHCP Server is
Disabled.
In this situation, the DHCP Server must still allocate an IP Address to the
Dial-in user. To set this IP Address:
1.
Connect to the Wireless Gateway
2.
On the
Quick Setup
screen, locate the DHCP Server section, and set
both the
Start IP Address
and the
Finish IP Address
to the IP Address
you wish to be assigned to the Dial-in user.
3.
Save these settings.
