Wireless Gateway User Guide
22
Access Control Log
This log shows connection requests which have been blocked by the
Access Control
feature
or the built-in NAT Firewall.
Accesses which have been blocked for other reasons (e.g. URL filter, incorrect dial-in pass-
word, incorrect WEP settings on the WLAN) are NOT shown in this log. (The "Internet Access
Log" can be used to view connection attempts which have been blocked by the URL filter.)
Data shown in this log is as follows:
•
Port
- The port used to gain access to this device. Possible values are LAN, WAN, WLAN
(Wireless LAN), and RS232 (serial port).
•
Source IP Address
- The IP Address of the PC or device whose access request was
blocked.
•
Physical Address (Hardware Address)
- The hardware address of the PC or device
whose access request was blocked.
•
Name
- If known, the name of the device whose access was blocked. This name is taken
from the
Access Control
database. For Wireless devices, the name is obtained from the
Wireless Stations
list, and so will always match the Physical (Hardware) address.
•
Destination
- The destination of the attempted access. Possible values are "Internet",
"LAN" or "WLAN".
•
"Internet" indicates an attempt by a LAN user, WLAN user, or dial-in user to access
the Internet using a protocol and/or port number which was blocked.
•
"LAN" or "WLAN" indicates a connection attempt from the Internet which was not
allowed. The protocol (TCP or UDP) and port number are shown in braces.
This data is useful if you want the access to be allowed. In this case, you can use this
data to configure the
Advanced Internet - User-defined Virtual Servers
screen or the
Advanced Internet - Special Applications
screen. (In the case of a Special Application,
this log indicates the "Incoming Connection" for the Special Application.)
See
Chapter 9 - Advanced Internet
for further details of the
Virtual Server
and
Special
Applications
features.
Internet Access Log
This log shows details of Internet access by LAN users, WLAN users, or the dial-in user.
Details shown in this log are as follows:
•
Source IP Address
- The IP Address of the LAN user, WLAN user, or dial-in user making
the connection request.
•
Destination
- The requested Internet IP Address or URL. Normally, the IP Address will be
shown. But if the
URL Filter
feature is Enabled, the URL will be displayed.
For details on using the
URL Filter
, refer to
Chapter 9 - Advanced Internet
.
•
Blocked
- This will indicate "Yes" if the connection attempt was blocked by the URL
Filter. Otherwise, this will be blank.