background image

 

 

Regulatory Approval 

- FCC Class A 
- UL 1950 
- CSA C22.2 No. 950 
- EN60950 
- CE 
- EN55022 Class A 
- EN55024 
 
Canadian EMI Notice 
This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. 
 
Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. 
 
European Notice 
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by 
the Commission of the European Community Compliance with these directives imply conformity to the following European Norms: 
 
EN55022 (CISPR 22) - Radio Frequency Interference 
EN61000-X - Electromagnetic Immunity 
EN60950 (IEC950) - Product Safety 
 
 

 
Three-Year Limited Warranty 

MiLAN Technology warrants to the original consumer or purchaser that each of it's products, 
and all components thereof, will be free from defects in material and/or workmanship for a 
period of three years from the original factory shipment date. Any warranty hereunder is 
extended to the original consumer or purchaser and is not assignable. 
MiLAN Technology makes no express or implied warranties including, but not limited to, any 
implied warranty of merchantability or fitness for a particular purpose, except as expressly set 
forth in this warranty. In no event shall MiLAN Technology be liable for incidental or 
consequential damages, costs, or expenses arising out of or in connection with the 
performance of the product delivered hereunder. MiLAN Technology will in no case cover 
damages arising out of the product being used in a negligent fashion or manner. 
 
 

Trademarks 

The MiLAN logo and MiLAN Technology trademarks are registered trademarks of MiLAN Technology in the   
United States and/or other countries.   

 
To Contact MiLAN Technology 

For prompt response when calling for service information, have the following information ready: 
- Product serial number and revision 
- Date of purchase 
- Vendor or place of purchase 

 
You can reach MiLAN Technology technical support at: 

E-mail: [email protected] 
Telephone: +1.408.744.2751 
Fax: +1.408.744.2771 
MiLAN Technology 
1329 Moffett Park Drive 
Sunnyvale, CA 94089 
United States of America 

 

Telephone: +1.408.744.2775 
Fax: +1.408.744.2793 

 
http://www.milan.com 
[email protected] 
 
© Copyright 2004 MiLAN Technology      P/N: 90000429 Rev. A 
 

               

Содержание MIL-L800i


























Отзывы: