The DLM-080 FUTURE Digital Recorder – User’s Manual
26.11.2004
26
7- preset displayed value [5.50] for the I=4mA current
-
keep
pressing the
keys
in the display field of channel no. 4
until
5.50
is shown
8- preset displayed value [8.00] for the I=20mA current
-
keep
pressing the
keys
in the display field of channel no. 4
until
8.00
is shown
9- carry out correction of amplification for the converter
- press the
key in the display field of channel no. 2 (a diode in the
key blinks)
10- finish configuring measurement channel no. 2
- press the
key
(
parameters will be stored in memory
)
10.4
CHANNEL No.1 AS HOUR-METER
(released by pressing the
key)
The
procedure:
1- set position of the A/D converter input type switch (back panel of the Recorder, the
switch in lower position)
1 2 3 4
ON
Ch5
2- turn on the Recorder
3- switch to the SETUP mode
- press the
key (a diode built-in in the key blinks)
- press the
key and hold it for approximately 3 sec.
(After 3 seconds the symbol
F-00
will be displayed in the real-time display field.)
