The DLM-080 FUTURE Digital Recorder – User’s Manual
26.11.2004
22
10.2
CHANNEL No. 8 AS THE 0..20 mA MEASUREMENT INPUT
(with measured values ranging from 100 to 500)
The
procedure:
1- set position of the A/D converter input type switch (back panel of the Recorder, the
switch in upper position)
1 2 3 4
ON
Ch8
2- turn on the Recorder
3- switch to the SETUP mode
- press the
key (a diode built-in in the key blinks)
- press the
key and hold it for approximately 3 sec.
(After 3 seconds the symbol
F-00
will be displayed in the real-time display field.)
- keep
pressing the
keys
in the real time field until
F-00
is shown
-
press the
key (
the Recorder displays will show [CODE set-up])
-
keep
pressing the
keys
in the display field of channel no. 3
until
888
is shown
-
keep
pressing the
keys
in the display field of channel no. 4
until
888
is shown
- press the
key
(the following will be displayed:
SET-UP
, function number –
F00
,
and function value)
4- set channel type as 0..20mA, display accuracy: 1
-
keep
pressing the
keys
in the display field of channel no. 3
until
F61
is shown
