6
EasyARM v6
MikroElektronika
page
1.
Connecting EasyARM v6 to power supply module
In order to enable the development system to be turned on, it is necessary to provide the power supply voltage over
an AC/DC connector CN37, Figure 1. When the development system is powered, it is necessary to set switch marked
POWER SUPPLY to the ON position. The power supply voltage provided via the CN37 AC/DC connector may be in a
range between 7 and 23V AC or 9 and 32V DC.
Figure 1-2
: Power supply module
Figure 1-1
: Powering the development system
1
2
Figure 1-3
: Power supply module connection schematic