Mikasa MRH-600DSA-DX, Инструкция по эксплуатации

Страница: 10 / 28

4-13 Descriptions of symbols used on warning labels
⑥
⑧
⑦
②
①
⑨
⑩
⑪
③
④
⑤
Fire hazard
Stop the engine when refueling. Fire may
occur if a flame is near the tank fuel port.
⑥
Danger: poisonous exhaust gas
Carbon monoxide poisoning may occur if the
exhaust gas is inhaled. Do not operate the
machine in a poorly ventilated area.
⑧
Danger of hearing damage caused
by noise
Always use ear plugs while operating the
machine.
⑦
Be careful not to get burned.
Accidental burn may occur if you touch the
hot parts (engine, muffler, etc.) during opera-
tion or immediately after the machine stops.
②
Be careful not to get caught in the
rotating parts.
During operation, be careful not to have your
fingers, body, clothes, etc. come in contact with
the rotating parts such as the V-belt and clutch.
P/N 9209-00110 DECAL, SET /MVH, MRH /EXP,EU (NPA-1474, 1475, 1477, 1478)
Part code No.9209-00090 DECAL, SET /MVC, MCD /EXP, EU
Do not use.
(For cutters)
NPA-1475 NPA-1474
NPA-1478
NPA-1473
NPA-1477
③
Be careful not to approach danger
source.
During operation, Be careful not to approach
hot parts and rotating parts.
④
Refueling Hazard.
Don't fill the fuel tank while the engine is
running or hot.
⑫
Operation of the parking brake.
Display a cancellation and lock position
Lifting position.
For lifting, use only one point hoisting
hook, and do not lift at any other part.
⑪
Read the manual carefully.
Always read the operation manual and have
good understanding of operation before your
work.
①
⑨
Danger: in the work in reverse
Stand at right side or left side of Handle
Bar, avoiding from standing back of
⑤
Lifting by the handle is prohibited.
Due to a falling risk, do not lift the
machine by the handle.
⑩
8