Manual
GLOGO 690
- ©Mikado Model Helicopters GmbH - Page 10
34 mm
43 mm
1
2
12 x
M2.5x10mm
5x
M2x10
5x
5x
M2
2 x
M2.5x8mm
4 x
M2.5x6mm
1 x
3x16
M2.5x6
M3x16
M2.5x10
M2.5x10
M2.5x10
M2.5x8
16 mm
16 mm
16 mm
16 mm
14mm
7
Servo
Arm
Setup
8
Main
Bearing
Block
Assembly
Attach the ball links so that the
engraved number is on the outer
surface pointing towards you.
Throttle
Linkage
First mount Bearing Block Sup-
port Plate, then slide Main Sahft
through the Bearing Blocks to
align everything before mounting
servos.
Slide Tail pulley onto shaft, then put pin
through the hole and pull the shaft/ pin up
into the Tail Pulley. Then clamp in place
by tightening the main shaft collar down.
BEFORE MOUNTING SERVOS
BLUE LOCTITE
EVERYTHING
Bag 9
Bag 7
Bag 9
Aileron right
Aileron left
Elevator
Rudder
Throttle
Bag 9
Bearing up
Bearing down
