Manual
GLOGO 690
- ©Mikado Model Helicopters GmbH - Page 13
4x
M2,5x12
4x
M2,5x18
8x
M2,5 Stop
M2,5x12
M2,5x18
M2,5
M2,5
11 Throttle/ Tail Servo Mounting 13 RC Equipment Mounting
12 Fuel Tank Mounting
It is required to glue the
fuel tank edge grommet
to the frame with super
glue to avoid premature
wearing
To Mount Vent Fitting, before insta-
ling the main nipple and grommet
thread a piece of wire through the
vent fitting and string it through
the main opening and through the
vent openeing. Then slide the vent
nipple up and secure with the nut
on the outside.
-Wire Length from Front of frame to Vbar Neo in
rear = 17.5”- 18” (445mm - 460mm)
-Use extensions, or customize wires to this length for,
Throttle Servo, Power Input Cables, Remote Glow (Optional),
Back Up Guard (Optional).
Large RX Pack Recomended for proper CG.
Example = OptiPower 2s 5000mah
Backup Guard
(Optional)
RX Pack mounted
on its side
Remote Glow
Driver (Optional)
Bag 9
Bag 10
2 x Frame Grommets
Bag 10
