Mighty Mule FM700, Руководство по установке

Страница: 5 / 42

1
IMPORTANT SAFETY INSTRUCTIONS
Because automatic gate openers produce high levels of force, consumers need to know the potential hazards associated with
improperly designed, installed, and maintained gate opener systems.
Keep in mind that the gate opener is just one
component of the total gate operating system . Each component must work in unison to provide the consumer with
convenience, security, and safety.
This manual contains various safety precautions and warnings for the consumer. Because there are many possible
applications of the gate opener, the safety precautions and warnings contained in this manual cannot be completely
exhaustive in nature. They do, however, provide an overview of the safe design, installation, and use of this product.
CAREFULLY READ AND FOLLOW ALL SAFETY PRECAUTIONS, WARNINGS, AND INSTALLATION
INSTRUCTIONS TO ENSURE THE SAFE SYSTEM DESIGN, INSTALLATION, AND USE OF THIS PRODUCT.
Precautions and warnings in this manual are identified with this warning symbol. The symbol identifies conditions
that can result in damage to the opener or its components, serious injury, or death.
Because GTO automatic gate openers are only part of the total gate operating system, it is the responsibility of the
consumer to ensure that the total system is safe for its intended use.
Clevis Pin
Hairpin Clip
Washer
Gate Bracket
Front Mount
Disconnecting the Opener
1. Turn control box power switch OFF.
2. Remove hairpin clip, clevis pin, and washer from
front mount.
3. Pull front mount away from gate bracket.
The gate can be opened and closed manually when the
opener is disconnected.
NOTE: Substitute Pin Locks for the clevis
pins to prevent unauthorized removal of the
opener from the gate (see Accessory
catalog).
To Manually Open and Close
the Gate, Follow the Procedure
Below:
CAUTION: Disconnect the
opener ONLY when the control
box power switch is OFF and
the gate is NOT moving.