background image

36

Pin Lock  (FM133)

The Pin Lock substitutes for the clevis
pin at the front mounting point of the
opener.  Helps prevent theft of the opener
from the gate, while allowing quick
release of the opener.

Key Chain Mini Transmitter (FM134)

The Key Chain Mini Transmitter is a miniature
version of the Mighty Mule

®

 entry transmitter and

has the same adjustable code settings. Battery included.

Push Button (Doorbell)
Control (FM132)

Unlighted doorbell button for
remote entry or exit
control. Connects directly to the
control board and uses
16 gauge, multi-stranded low
voltage wire (not included).

Low Voltage Wire (RB509)

The 16 gauge, multi-stranded, dual conductor Low Voltage
Wire
 connects the AC powered  transformer or the solar
powered battery charger (Solar Panel) to the control board.
Also used for the connection of accessories, such as locks,
keypads, push buttons and other wired  control devices. This
specially designed wire is UV treated, PVC coated and ready
for direct burial. Available in 1000' rolls or special lengths.

These Accessories are Available From Your Retail Store

Mighty Mule
Entry Transmitter (FM135)

The Mighty Mule

®

 entry transmitter, with

adjustable code settings, is standard equipment
with Mighty Mule

®

 systems. Battery included.

AUTO

MA

TIC

 

GAT

E L

OC

K

E L

E C

T R

O N

I C

  S O

L E

N O

I D

  D

R I

V E

Automatic Gate Lock
Pull-to-Open (FM143)

A MUST for securing the gate
against forced entry or exit.
Solenoid driven, plated steel bolt
lock with a zinc plated steel
housing. The horizontal electronic
lock is used with the Mighty
Mule

®

 system for maximum

stability and security.
Recommended for gates over 8 feet
long or where high winds are
common.

Solar Panel (FM121) 

(has a 2 year warranty)

The Solar Panel is a solar powered battery

charger for use with the Mighty Mule

®

 gate

opener system. Particularly suited for remote
installations, the Solar Panel comes with

tubular steel support, mounting clips, wire

connectors, and 8 ft. of low voltage wire (for
longer length wire
see RB509 below).  The
Mighty Mule

®

 control board has clearly labeled

terminal connections for easy installation of the

Solar Panel.  Installation in some regions of the
world may require dual solar panels for adequate
charging power.

GTO Digital Keypad  (FM137)

The specially designed digital keypad can be
easily installed as a wireless or wired keypad. It
can be programmed to use up to fifteen different
personal identification number (PIN) codes. Each
code is face programmable with additional
security features built in. Requires 3 AA batteries
(not included).

Gate Opening Sensor (FM138)

The Gate Opening Sensor is designed for residential and
agricultural applications and is compatible with the Mighty
Mule automatic gate opener models. The Gate Opening
Sensor is an electromagnetic sensor, which offers 'hands free'
operation of the Mighty Mule Automatic Gate Opener with a
12 ft. radius of detection of vehicles in motion.

Содержание FM700











































Отзывы: