background image

38

GTO, Inc.

For sales call toll free:

1-800-543-GATE

For technical service Call toll free:

1-800-543-1236

Mighty Mule

®

 

Limited One Year Warranty:

GTO, Inc., gate openers and accessories are warranted by the manufacturer against defects in materials and
manufacturer workmanship for a period of one (1) year from date of purchase, 

provided the recommended

installation procedures have been followed.

In the case of product failure due to defective material or manufacturer workmanship within the one (1) year
warranty period, the product will be repaired or replaced (at the manufacturer’s option) at no charge to the
customer, if returned freight prepaid to GTO, Inc., 3121 Hartsfield Road, Tallahassee, Florida, USA 32303.
IMPORTANT: Call (850) 575-4144 or Fax (850) 575-8950 for a Return Goods Authorization (RGA)
number before returning accessory to factory.  
Products received at the factory without an RGA number
will not be accepted.  Replacement or repaired parts are covered by this warranty for the remainder of the one
(1) year warranty period or six (6) months, whichever is greater.  GTO,  Inc. will pay the shipping charges
(equal to United Parcel Service GROUND rate) for return to the owner of items repaired under warranty.

The manufacturer will not be responsible for any charges or damages incurred in the removal of the defective
parts for repair, or for the reinstallation of those parts after repair. This warranty shall be considered void if
damage to the product(s) was due to improper installation or use, connection to an improper power source, or if
damage was caused by lightning, wind, fire, flood, insects or other natural agent.

After the one (1) year warranty period, GTO, Inc. or one of its authorized service centers will make any
necessary repairs for a nominal fee.  Call GTO at (800) 543-1236 for more information.  This warranty gives
you specific legal rights, and you may also have other rights which may vary from state to state. This warranty
is in lieu of all other warranties, expressed or implied. NOTE: Verification of the warranty period requires
copies of receipts or other proof of purchase.  Please retain these records.

The Following Replacement Parts Are Available Through

Your Retail Store's Special Order Desk.

Replacement Battery (RB500)

Standard 12 volt, 7.0 ampere-hour, maintenance-free battery for the Mighty Mule gate opener.
Only this battery is approved for use with the Mighty Mule.  Battery life 3 to 5 years.

3121 Hartsfield Road 

 

Tallahassee, Florida, USA 32303 

 

(850) 575-0176 

 

Fax (850) 575-8912 

 

Web site www.gtoinc.com

AUTOMATIC GATE OPENER

24 Amp Hour Battery Kit (FP296)

This large 12 volt, 24 ampere-hour, maintenance-free battery is for the
Mighty Mule gate operators. It will supply additional power for increasing
the number of open and close cycles. The kit comes  with the battery and
wiring harness for easy installation.  Battery life 3 to 5 years. Enclosure not
provided.

Содержание FM700











































Отзывы: