Migatronic MultiFeeder, Инструкция по эксплуатации

Страница: 6 / 16

6
CONDITIONS OF WARRANTY
Migatronic (which is hereinafter referred to as “the
Supplier”) continuously carries out quality control
throughout the manufacturing process as well as
check of the complete units through comprehensive
testing.
The Supplier provides warranty in accordance with the
following provisions, by correcting errors and defects
on units, that demonstrably and within the warranty
period may have been caused by faulty material or
workmanship.
The warranty period is 24 months for new welding
machines, 12 months for new accessories and 6
months for spare parts. The warranty period is
calculated from the date of invoice to the end user
from the Supplier or the Supplier’s dealer/distributor.
The original invoice is proof of the warranty period.
The warranty period is 12 months or maximum 1,800
operating hours for the CoWelder solution. The
warranty period is calculated from the date of invoice
to the end user from the Supplier or the Supplier’s
dealer/distributor. The original invoice is proof of the
warranty period.
The warranty period is 24 months for new welding
machines incorporated in robotic, automated and
CoWelder solutions. The warranty period is calculated
from the date of invoice to the end user from the
Supplier or the Supplier’s dealer/distributor. The
original invoice is proof of the warranty period.
The warranty period can be extended to up to 60
months on selected parts by registration at
www.migatronic.com of new welding machines not
later than 30 days after the date of purchase. The
following welding machines fall within the scope of the
extended warranty: Automig, Automig-i, MIGx series,
Sigma Select series, Omega series, Sigma series,
Sigma Galaxy, Pi series, Pi Plasma, Zeta.
Welding torches and intermediary cables are
considered aswearing parts, and only errors and
defects found within 12 months upon delivery and due
to faulty material or workmanship, will be considered
under warranty.
Warranty repairs neither extend nor renew the
warranty period.
Any transport of goods or persons in connection with a
warranty claim is not covered under the Supplier’s
warranty obligation and will therefore be at the buyer’s
expense and risk.
You can read the complete Warranty Conditions at
www.migatronic.com
Dispose of the product according to local
standards and regulations.
More information can be found under Policies
at www.migatronic.com