Maintenance and repair
© MIG·O·MAT GmbH
BA_Lötstar_EN_Vers. 07.2016
39
If the allowed reactor temperature is exceeded, the display
shows the following malfunction:
Excess temp.!
Let cool down!
Operation can be continued after the unit has cooled down. For
this, change the set pressure value back to the required value.
In case of malfunctions due to overheating it is important not to
switch off the unit at the mains switch, as the ventilating device
stops operating, too. If you feel uncomfortable due to a too
noisy operating sound of the ventilating device, switch the unit
into stand-by operating mode by pressing the
on/off
key
I/O
.
This reduces the speed of the ventilating device. In this mode,
cooling down will take considerably longer!
If the pressure control device has broken down the unit
automatically switches off and the display shows the following
malfunction:
Faulty pressure control!
Switch off the unit at the mains switch and restart it. If the
malfunction is repeated please contact your supplier or the
manufacturer of the unit.
