manualshive.com logo in svg

Miele WXR 860, Руководство по эксплуатации

Поделиться
Скачать
Miele WXR 860 Скачать руководство пользователя страница 25

Before using for the first time

25

6. Starting the calibration
program

For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.

To do this, the 

Normal

 program 

must

be run without laundry.

No other programs can be started until
calibration has been carried out.

The following message will then appear
in the display:

 

Open faucet and start program “Normal”

without load

Confirm with the 

OK

 sensor button.

The display will then change to the
standard menu for the 

Normal

 program.

11:02

1:57

Normal

h

Overview

Temperature

Spin speed

TwinDos

Options

Not selected

Whites

 Timer

 Save

Hot plus

Max

Touch the 

Start/Stop

 sensor button.

The washing machine calibration
program has started. It will take
approximately 2 hours.

At the end of the program the following
message will appear in the display:

 

Setup complete

Take hold of the door and pull it
open.

Useful tip: 

Leave the door slightly open

to allow the drum to dry.

Switch the washing machine off with
the 

 button.

Содержание WXR 860





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды