Miele WSA 023 Active Скачать руководство пользователя страница 27

Страница: 27 / 84

6. End of programme

Opening the door and remov-
ing the laundry

The door remains locked during the
anti-crease phase. The indicators light
up for the first 15 minutes.



appears on the time display.



Turn the programme selector to the



position.

The



indicator light will go out.

The door will unlock.

Tip:

After the anti-crease phase, the

door will have unlocked automatically.



Reach under the recessed grip and
pull the door open.



Remove the laundry.

Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Remove all items from the drum.



Check the door seal for any foreign
objects.

Tip:

Leave the door slightly open to al-

low the drum to dry.



If applicable, remove the used cap-
sule from the detergent drawer.

Tip:

Leave the detergent drawer slightly

open to allow it to dry.

Содержание WSA 023 Active





















































































Результаты поиска

Содержание WSA 023 Active

Отзывы:

Похожие инструкции для WSA 023 Active

Бренды по названию

Популярные бренды

Miele WSA 023 Active, Руководство по эксплуатации

Результаты поиска

Содержание WSA 023 Active

Отзывы:

Похожие инструкции для WSA 023 Active

Бренды по названию

Популярные бренды