Problem solving guide
With the help of the following notes minor faults in the performance of the ap-
pliance, some of which may result from incorrect operation, can be put right with-
out contacting the Service Department.
Repair work to electrical machines should only be carried out by a suitably
qualified engineer in accordance with local and national safety regulations. Un-
authorised repairs could be dangerous.
Fault
Possible cause
Remedy
The I /
h
On/Start indic-
tor light does not light
up. The programme
does not start.
There is no power
supply to the machine.
Check that
–
the door is properly closed.
–
the plug is correctly
inserted in the socket and
the mains electricity supply
is switched on.
–
the fuse or circuit breaker
has not tripped.
The
p
check light
flashes, although the
programme has fin-
ished as usual.
The water inlet is
restricted.
–
Open the stopcock fully.
–
Check the inlet hoses for
kinks.
–
The water pressure is too
low
The filters in the inlet
hoses are blocked.
–
Clean the filters (see
section “Cleaning the filters
in the water inlet”).
The indicator light goes out
when the programme selector
is turned to the
r
End
position.
Problem solving guide
32