Miele WMR 861 WPS, Руководство по эксплуатации

Страница: 93 / 116

Installation and connection
93
This washing machine can be operated
with cold mains water and/or hot water.
Markings of water intake hoses
Cold water (tap
water) = Silver label
Hot water = Red label

For technical reasons, the
washing machine must always be
connected to cold mains water.
Cold water (tap water)
The washing machine is programmed to
cold water operation at the factory.
The other water intake hose can be
fixed at the back of the appliance.
Hot water
– If you wish to use a hot water
connection with the washing
machine, it must be reprogrammed
as described in “Settings - Water
intake”.
– The temperature of hot water at the
mains water tap must not exceed
60°C. The preferred temperature is
55°C. Consult a plumber if the
temperature at the tap exceeds 60°C.
– Before connecting to the mains water
tap, check that the outflow of cold
water does not exceed 5 litres. Each
additional litre of cold water reduces
the energy efficiency.
– If the hot water tap is turned off for
some time, the washing machine will
automatically switch to the cold
water connection. This safety
measure is not intended for the
permanent operation of the
appliance. The washing machine
continues to wash using hot water
operation, but washing results are
worsened.
– If the programmed temperature when
Hot water MW + rinses is selected is
too low, the washing machine
automatically switches to cold water
operation. In a programme without
Extra options and without a part load,
two rinses with an increased water
level are carried out to achieve a
good rinsing result.