Settings
108
Water intake
You can choose between cold water
and hot water intake.
Options
– Cold water (default)
The washing machine will be
operated with cold mains water only.
– Hot water main wash
To save energy, hot water will be
used during the main wash if a
temperature of 30°C or higher is
selected. To be more energy efficient,
you can heat up your water with
cheaper, energy-saving options, e.g.
gas, solar power, oil. The temperature
has to be below 60°C.
– Hot MW + Rinses
Hot water is used in the main wash
and during rinses. Rinsing with hot
water can reduce water consumption
by approx. 10%.
For technical reasons, the
washing machine
must
always be
connected to cold mains water.
Longer pre-wash Cottons
If you require a longer pre-wash, you
can extend the Cottons programme's
standard pre-wash time of 25 minutes.
Options
– No increase (Factory default setting)
25-minute pre-wash
– +6 min.
31-minute pre-wash
– +9 min.
34-minute pre-wash
– +12 min
37-minute pre-wash
Soak duration
You can set a duration for the soak
process of between 30 minutes and 5
hours.
You can select the duration in 30-
minute increments. When the
Soak
Extra option is selected, the laundry will
be soaked for the duration selected.
Содержание WMR 861 WPS
Страница 113: ......
Страница 114: ......
Страница 116: ...M Nr 11 007 160 00 en AU NZ WMR 861 WPS ...